Set up and run - Steel parts
Hi Folks.
I thought a thread on machining larger steel parts would be useful.
Please share your thoughts and information here.
I'll start the ball rolling with part one of this video series:
Cliff
https://www.youtube.com/watch?v=Pz_12ETmgbQ&t=4s
Re: Set up and run - Steel parts
Touching a drill at the tip on a cnc lathe is great if you do not drill too deep, otherwise, it's better to indicate the center on the holder because if you drill much deeper, you'll get a lot of rubbing on the side of the drill if you are like 0.010 off-center.
Nice video.
Re: Set up and run - Steel parts
Quote:
Originally Posted by
jeffrey001
Touching a drill at the tip on a cnc lathe is great if you do not drill too deep, otherwise, it's better to indicate the center on the holder because if you drill much deeper, you'll get a lot of rubbing on the side of the drill if you are like 0.010 off-center.
Nice video.
I agree - If you are doing critical deep hole work, eg reaming, you actually need to dial in the tool in line with the Z travel in both directions. Having it correct at either end but on an angle will give issues on precision or deep work. Cheers Cliff
Re: Set up and run - Steel parts
Your videos are nice. I always pick up a trick or learn something in general.
Do you use conversational programming for most your lathe work?
Re: Set up and run - Steel parts
Quote:
Originally Posted by
mountaindew
Your videos are nice. I always pick up a trick or learn something in general.
Do you use conversational programming for most your lathe work?
Thanks MD. Yes I use conversational for my lathe work and Bobcadcam for mill. Cliff
Re: Set up and run - Steel parts
Re: Set up and run - Steel parts
Hi again Folks. And here is part 3. Finding the limit in steel.
https://www.youtube.com/watch?v=OxRBgyxbchI&t=3s
Re: Set up and run - Steel parts
Cliff, thanks for the series of Slant Pro videos. Do you think positive rake holder/inserts such as CCMT would help at all the larger size part?
Re: Set up and run - Steel parts
Quote:
Originally Posted by
maker of things
Cliff, thanks for the series of Slant Pro videos. Do you think positive rake holder/inserts such as CCMT would help at all the larger size part?
Hi - The WNMG style I use here is a positive rake insert - but I agree it is not high rake and does take a bit more torque to push that a even higher raked positive insert.
The trouble with going higher rake is the tool is weaker and not so good at rapid stock removal in steel. With a sticky CQ MS high rake tools are more likely to break. Also the 80 deg of the WNMG allows facing and turning with the same tool.
But with a weaker tool with more positive rake, a pronounced chip breaker and lighter cuts, larger diameters can probably be acheived - it will just take more time, and might need more watching.
Cheers Cliff
Re: Set up and run - Steel parts
The other day I was watching a tv show of a guy cnc machining lathe parts for high performance engines. He was having same problem and that machine was huge! Was funny because with all the power and precision the guy just made the bird nest faster. :).
Re: Set up and run - Steel parts
Here is a final summary video. With some repeat video clips to give some background, then on to how SlantPro could be improved.
Cliff
https://www.youtube.com/watch?v=mxQpUNiM_hk&t=11s
Re: Set up and run - Steel parts
Cliff are you thinking to make a larger pulley for the spindle?