Re: 6040 CNCEST USB problems
Same board?:
https://www.amazon.ca/Aluoflower-100.../dp/B0759KP1CV
There appears to be a driver for it out there somewhere....
try googling the board part number?
A U-Tube video:
https://www.youtube.com/watch?v=uaHiLasUANs
Steve
Re: 6040 CNCEST USB problems
Thanks, a member send me the link to the files and it works like a charm....thanks again for the help ....now figuring everything els out.
Re: 6040 CNCEST USB problems
Hi Mike,
Same situation on my side.
Could you share the link and driver files you mentionned ?
thank a lot !
Antoine
Re: 6040 CNCEST USB problems
https://madexp.com/2018/01/01/cnc-3020-usb/
this should be it.
Quote:
Originally Posted by
aauffret
Hi Mike,
Same situation on my side.
Could you share the link and driver files you mentionned ?
thank a lot !
Antoine
Re: 6040 CNCEST USB problems
Hi Mike!
I bought the same CNC, but another size (6040) and seller didn't sent any manuals, software or drivers. Can you share all this files with me?
Regards,
Igor
Re: 6040 CNCEST USB problems
Quote:
Originally Posted by
MikeCorp
Hey All,
http://www.cnczone.com/forums/attach...d=388180&stc=1
Connected everything like it should installed Mach3 and put on the CNC openend the Mach3 software it says driver loaded but nothing works or responds.
I did set the config as it should (double checked), still nothing.........
No drivers cd or Manual was given, took a lot of searching the internet too find anything like plugins but non worked for me.
Can someoone please help me i really want too enjoy my CNC. (Pic above is my USB card)
Gr Mike
Can you please send it to me? It sounds like power is at the motors, but nothing happens. My wife is still trying to figure out what I spent our money on:(
Sent from my iPhone using Tapatalk
Re: 6040 CNCEST USB problems
Those boards do not control functions using discrete I/O functions in real time. Upgrade to a UC100 or UC300ETH
https://cnc4pc.com/c76-uc300-multifunction-board.html and you will be able to run this with Mach3/4 or UCCNC.
Please contact us in our website if you have questions.
Arturo Duncan
https://cnc4pc.com
Re: 6040 CNCEST USB problems
Since we are on this CNCEST USB board, my table works fine for XYZA, but the spindle controller cannot receive a M03 from Mach3.
When you click spindle on, it spins up, and click spindle off, it de-energizes.
It has recognized an M03 and M05 in the past, but just for a short period.
Any ideas?
-Christian
6040 CNCEST USB running on Mach3 with the RnRMotion.dll plugin
Re: 6040 CNCEST USB problems
Hi. Did you get it working. I have the same problem and am looking for answers.
Thanks for any help you can give me.
Regards.
James
Re: 6040 CNCEST USB problems
Hi.
Could you send me the files please.
King regards.
James
Re: 6040 CNCEST USB problems
Still trying different things...
Quote:
Originally Posted by
hengrave
Hi.
Could you send me the files please.
James
Which files?
Re: 6040 CNCEST USB problems
Quote:
Originally Posted by
hengrave
Hi.
Could you send me the files please.
King regards.
James
James-
Figured it out yet?
I have: PM me if you need help.
-Christian
Re: 6040 CNCEST USB problems
Not sure if this is where to start, but it seems that many are seeking files to get there 6040 CNC to talk with their PC. Same issue. No connection. Just got this thing put together and cannot get it to do a thing?
Re: 6040 CNCEST USB problems
Quote:
Originally Posted by
JohnLeslie
Not sure if this is where to start, but it seems that many are seeking files to get there 6040 CNC to talk with their PC. Same issue. No connection. Just got this thing put together and cannot get it to do a thing?
Did you see post #5 in this thread?
There's a link to a page with some info on it.
Basically, you need to copy a 'plugin' ( for YOUR motion Card ) into your Plugin Folder in Mach 3, as well as having Mach 3 set up correctly.
The Supplier SHOULD have given you a CD or a link where to find the file, but thats not always teh case.
The file will be a "dll' file.
Re: 6040 CNCEST USB problems
Quote:
Originally Posted by
MHE123
Hi Mike!
I bought the same CNC, but another size (6040) and seller didn't sent any manuals, software or drivers. Can you share all this files with me?
Regards,
Igor
I just bought the same CNCEST 6040 USB version with 1.5kw spindle
can you or anyone help
I am new to cnc and I expected to have some support from the seller
thanks
Re: 6040 CNCEST USB problems
Quote:
Originally Posted by
gcpcnc
I just bought the same CNCEST 6040 USB version with 1.5kw spindle
I am new to cnc and I expected to have some support from the seller <<<"HA HA HAAAA...ya right"
thanks
If you have the RED USB board shown at the top of this post, this is the driver which will need to be copied into the \MACH3\Plugins directory:
https://drive.google.com/open?id=1J7...cAn2oyuDmouP2U
Re: 6040 CNCEST USB problems
Also need to copy this file https://drive.google.com/open?id=1Fx...82oOo_nj0Gq1JK
to the \MACH3 directory for the proper settings.
-Christian
1 Attachment(s)
Re: 6040 CNCEST USB problems
Thanks Christian.
Do you know what .dll for this BOB?
RnRMotion.dll not work.
1 Attachment(s)
Re: 6040 CNCEST USB problems
Is this the same board?
If so, RnR motion .dll should work.
Attachment 424140
I found the Manual here
https://ncmaster.com.au/ncmaster/Mac...Breakout-Board