EIA ISO Code Multiplex spindlles sync

Dear all,

I am new to this spindles sync turning.

I have a problem with my Mazak Multiplex 6250 with Fusion 640T.

I have tried to use in Eia/Iso the M511 and M512 codes for sync of bouth spindles.

This is the example of program sent from Mazak Deutschland. And my issue is stated bellow.

T0202.0 (Call Tool)
G0 G53 Z-100. (Position of Spring Center in Head 1)
G110 Z2
G0 G53 Z-100. (Pos. Head 2 both spindel together)
G111
M511

G50 S500 (max. spindle speed)
G96 S100 M3
G0 X90. Z-2.
G1 G99 Z50. F0.3 (Programm)
G0 U5. W -1.
M5

M512 (the CNC does not execute this command and cannot pass over this command).
G0 G53 X0 Z0
G110 Z2
G0 G53 X0 Z0
G111
M30

Dose anybody use the same setup?

I would need an example of turning program.

Thanks in advance!