Re: Independent PWM signal output
Why do you need less than 1% duty cycle?
Re: Independent PWM signal output
I think I put myself wrong.
I would like to call up the following values via the toolbar button. As in the example above with a dropdown menu.
M63 P1 Q106
M63 P1 Q112
M63 P1 Q218
I would like to use it to regulate the speed of a stepper motor that drives the pump for my minimal amounts of cooling.
Re: Independent PWM signal output
Like this:
Code:
cmd: "Machine.Output_PWM" image="BtnBottom/laser-beam.svg" imagechange="true" stroke=1.1 typ=menu val="[0;50;106]@FREQ 106|[0;50;112]@FREQ 112|[0;50;218]@FREQ 218"
Re: Independent PWM signal output
Thanks. I had already tried a few things. I had no idea simply to write the value behind another semicolon.
Can you please break down what the three values stand for?
And how do you differentiate between the pins? So 1, 2 and 6.
Re: Independent PWM signal output
First value is pin (0 is pin 1...).
Second value is duty cycle.
Third value is frequency.