Cincinnati Milacron Avenger 200s Question
We purchased an Avenger 200s, (Acramatic 850sx control) and wondered if anyone could lend me a hand for initial start up.I can't do anything with the machine. It passes all the tests on the start-up page...but@ the bottom it says (flashing)"Host Control Initializing" for (over an hour). We got the machine up and running briefly but couldn't get past the initializing phase during start-up. We were unable to jog the machine so we could begin zeroing. Once we shut the machine down and started back up we found ourselves back at square one. We sprayed all the boards with canned air and put them back but to no avail. "HOST CONTROL INITIALIAZING" Any help or information that anyone has would be greatly appreciated.
850SX machine parameters (MTB Commision Data)
Hello,
I have a Sabre 1000 with the 850SX. I have recieved the .dat files with the machine parameters (MTB Commision Data) from the manufacturer. How do I load the parameters?
The .dat files have a G71 (metric) in the first line so it looks like I can apply them like an regular parts program but this would require some additional things to be added to the program to be ran as a parts program, a ":" in the first line for example and possibly an M02 at the end. So, that makes me think that they are not intended to be ran as a program, otherwise these things would be included already.
Basically the question is, I have the .dat files, now what?
Thanks,
Eric