colchester 2000l CNC not ready alarm

Dear All,

i have a problem with the Colchester 2000l CNC, the machine boots up with the error 600-06 and "not ready" is flickering on the left side of the screen, no specific alarm number observed

the machine controller is Fanuc 0t control

I have checked almost everything, EMG button, circuit, Fuses circuit breakers but with no success

Anyone have the maintenance manual for Colchester 200l, power diagram please share it with me
Along with the cabinet contents diagram if you have it

Email:[email protected]

Tell what fanuc do you have?
0TA? 0TB? 0TC? 0TD?

Check The Turret clamp , The Air Pressure Switch and Door interlock it is an External Alarm

Thank you for the feedback,

no air pressure to this machine is connected, where the torrent clamp is disabled i suppose since long

Definitely I have checked all the Emergency buttons and door lock also and no issue observed, this alarm has happen after the main fuse of the machine burned out
When I replaced it, the alarm appears

I am attaching here with some pictures from the monitor and the machine PMC
It might help to identify the problem, and from where the “Not ready” is coming


Attachment 200046Attachment 200046Attachment 200048Attachment 200050Attachment 200052Attachment 200054Attachment 200056Attachment 200058Attachment 200060Attachment 200062Attachment 200064Attachment 200066Attachment 200068Attachment 200070

email sent
have you fix your problem?

Dear All,

yet I did not solve the problem with my machine,

any one please can help ?????

May be I could help you. PM me

Dear All

still I did not solve the mentioned alarm in my machine, it kept aside due to this now quit long
any body can help with this error

email sent

Dear Experts

any one can help with the machine problem, I observed that the servo cards power is not lighting as usual
can some one help to diagnose the problem

Hi, i have a problem with cycle start and the ouput Y49.7. Do you have the ladder where a can see the conditions for these signals?