Need FeatureCam post processor

for Hardinge Elite II-8/51, GE Fanuc Series 18i controller! Can anyone help?

Did you ever get a post for the Fanuc 18i?
Does your machine have y axis?
I'm looking for post also but need for y axis?

Need a post for harding conquest t42 with sub-spindle and fanuc 18t
That Works.

The delcam post support team will be happy to help you just shoot them an email at " napostsupport at delcam.com "

I have an older version of featurecam 2006 that's not supported any more. When I purchased it I was using a deferent lathe. We have a Harding Conqueat T42 now with a sub-spindle. The post that came with featurecam doesn’t work very well at all.

I have put in a request on your behalf, I'll update this post when I know more.

Delcam requests more info:

Does the machine have live tools? X and Z? Does the machine have a Y axis? Is the sub commanded to move as a B axis?

Can you send a known good program that we can use to select a post that produces similar output? Any peculiar details of the machine?

Really just need more than a name. Please characterize the machine as best as you can so we can choose the best available post.

It has live tooling on main turret
Main spindle has 2.5 degree indexing for milling.
X/U Axis Motion Main turret
Z/W Axis Motion Main turret
Y/V axis for sub-spindle Axis Motion

Delcam shot me down, I have 3d and turn but no turn/mill, and they won't provide a post for a product I don't have. Sorry I tried.

Do you have anything that will work with Hardinge Conquest t42 with fanuc 18t controller?

No y axis. Just subspindle.

for Hardinge Elite II-8/51, GE Fanuc Series 18i controller! Can anyone help?http://garden.fulltomlins.com/02.jpg