Re: Hurco Hawk 5M Retrofit
What software are you running? Are you loading the software from boot via the floppies?
Do you have the config disk?
Re: Hurco Hawk 5M Retrofit
It won't boot from the hard drive. I get the error shown above when trying to do so. I've tried to boot from floppy, the disk reads:
Hawk 5M Max 3 ISA
Very. 1.51
05 July 94
I only have disk 1 of 2. Disk 2 did not come with the machine. It read the first disk fine but I can only get as far as the screen to insert the second disk since I don't have it. I've contacted Hurco but they haven't gotten back to me yet.
Re: Hurco Hawk 5M Retrofit
I might be able to find it for you. The thing is, after v1.52, it needed more memory. Do you know how much is in your system?
Re: Hurco Hawk 5M Retrofit
dont have a clue on the memory but if you have a disk i will be happy to try it, thank you for looking into this
Re: Hurco Hawk 5M Retrofit
The oldest I could find was V1.54
It may need more memory than you have (I think it needed 4Mb if I remember correctly).
If you want it, I’ll send it with a Hawk5 config too.
Re: Hurco Hawk 5M Retrofit
Got the email, thank you! will try it out tomorrow afternoon.
Re: Hurco Hawk 5M Retrofit
Quote:
Originally Posted by
Sandvet03
Where are you located? I have a backup hard drive but I have a feeling it requires more memory then you may have like bloke hinted towards. Its a 2.0v he would know the requirements. If you do decide to go the new electronics route i may be interested in some of the old parts.
Yeah the disk he sent me wouldn't boot. I looked on the motherboard and it only has one SIMM in it so I'm assuming 4mb of RAM. Didn't think to take note of it on the POST screen. In any case I decided to go ahead with the retrofit. I'm located in Birmingham Alabama. If there are any parts you'd like jst lay claim to them. I"ll be needing to get them out of the way very soon.