2 Attachment(s)
FUJI FRN0.75C1S-7QI 240 VAC 1PH to 3PH VFD
Question. What are the control circuit connectors used on these VFD's called? I think the pin spacing is 2.4 or 2.54 mm. I bought this VFD from Surplus Center and it came without the screw terminal connectors.https://www.cnczone.com/forums/attac...d=465448&stc=1https://www.cnczone.com/forums/attac...d=465450&stc=1https://www.cnczone.com/forums/attac...d=465450&stc=1
Re: FUJI FRN0.75C1S-7QI 240 VAC 1PH to 3PH VFD
Could not get much info from Surplus Center. I finally found someone at FUJI that told me that these VFDs were programed for a specific machine and were not able to be used otherwise. All I could get it to do was power up, but could not change any settings and could not get power out to the motor. Sent them back and got a refund.