Hello.
I´M rebulding a old Bosch CC 100.
I made a video.
https://www.youtube.com/watch?v=UnzuwKBEBCg
PLEASE some one tell me wath I´M doing wrong?
After install the parameters file, it stays doing noting.
I use a null modem and noting change.
Printable View
Hello.
I´M rebulding a old Bosch CC 100.
I made a video.
https://www.youtube.com/watch?v=UnzuwKBEBCg
PLEASE some one tell me wath I´M doing wrong?
After install the parameters file, it stays doing noting.
I use a null modem and noting change.
Hi Tony,
Is the PC handshaking via the serial cable? I seem to remember the CC100 is fairly sluggish even a low baud rates, and will pause transmission (by setting CTS low) until it processes the received data.
I dont think the CC100 can software handshake, so try hardware handshaking using RTS and CTS, or try a lower baud rate
Keep us posted
Rgds
Loko
Hello, Loko.
It´s really going in the right direction.
After trying lower baud and using a new cable. It appears to communicate.
Now I have finally an error:
LOAD ERROR 324 - Write Protect Memory. ( one file gives this error)
LOAD ERROR 216 - Incorrect Data Format ( one file gives this error and others as show on the picture)
Hi have 2 parameters files, but I´m not Shure that the files are in correct for the Wadkin 2000.
Make sure you dont use a windows editor when editing & saving the files. Use something like notepad++ and save in a text only format like unicode
Tonyman, I have similar problems, I have sent the parameters in the past successfully but now that i changed the battery the process does not work. Can you please send me your parameter file to see if mine got corrupt in any way?
Thank you in advance!