Kitamura 1982 or so
I get intermittent 421 y servo alarm
i took the covers off and ran it no tool and ran fine
It seems right when I have a job to do
it alarms
any Ideas
Thanx
Joe
Printable View
Kitamura 1982 or so
I get intermittent 421 y servo alarm
i took the covers off and ran it no tool and ran fine
It seems right when I have a job to do
it alarms
any Ideas
Thanx
Joe
It also seems that when the alarm happens, and I reset
if I don't touch the ballscrew it will alarm again.
If I turn the screw by hand (even an 1/8 turn ) it will go ,as in home Y
There is also no binding that I can feel when I turn screw by hand
thanx
Joe
I had a little smash on Z axis on daewoo puma 6 m control now I canot get away with 420 or 421 alaram machine worked fine
It might be your cover they are giving load to the ball screwsQuote:
Originally Posted by actionman
it might be your gibbs are loose or too tight and they are giving errors to Y axis servo
check the limit swithes make sure there are no chips there