2007 Haas Mini Mill stuck on boot up screen

Aug 5, 2012 Sunday Morning, power up my 07 Haas Mini Mill, all I get is the colorful boot up screen, Nothing else come up on the screen, press "RESET" and "POWER UP", it beeps, but nothing else show on the Screen.

youtube video link:
2007 Haas Mini Mill stuck on startup sceen will not boot up - YouTube

picture link:
http://webpages.charter.net/gangpw92...ill_noboot.jpg
http://webpages.charter.net/gangpw92...ill_noboot.jpg

Possible mainboard failure?
There are three boards stack together. some of the LED is not lit up.
http://webpages.charter.net/gangpw92..._noboot_01.jpg


PROBLEM CONFIRMED as Aug 6, 2012. BAD Mainboard. (A1 Processor PCB Cyclone II )


Phillip
Aug 6, 2012

Shut it off and turn it back on. Mine does this same thing from time to time, but runs fine otherwise.

YES. I have shut this thing down and turn back on dozen times by now, still getting this colorful screen, nothing else. I DID had "Low Battery "alarm for the past year, never bother me since it goes away by shut down and turn back again. Is it because the onboard main battery finally die cause the computer corrupted?

Quote:

---

Originally Posted by gangpw924

YES. I have shut this thing down and turn back on dozen times by now, still getting this colorful screen, nothing else. I DID had "Low Battery "alarm for the past year, never bother me since it goes away by shut down and turn back again. Is it because the onboard main battery finally die cause the computer corrupted?

---

You ignored a Low Battery Alarm for a year?

I am rolling around on the floor laughing at this point. Useless information, I know. Almost as good as reality television.

Quote:

---

Originally Posted by Machineit

You ignored a Low Battery Alarm for a year?

---

Well, We don't use this machine as 24/7, power up once a month, cut few things and sit there most of the time, we only get to see this LOW BATTERY Alarm few time during the past years.

In the process inviting HFO tech come to visit us, we are looking at Few thousands here, possible faulty mainboard.

AS AUG 5, 2012
PROBLEM CONFIRMED, BAD Processor PCB board (A1)