Printable View
how can i make this program on master cam please advise me
N0000 T0202
N0010 M3 S1000
N0020 G0 X-18 Z5
N0030 Z2
N0040 Z1
N0050 G72 X-2.2 I0.1 K0.3 P0080 Q0090 F115
N0060 G0 X-18
N0070 Z5
N0080 G1 X-2.2 F80
N0090 Z-9.9
N0100 G1 X-6
N0110 Z-11.1
N0120 G1 X-15
N0130 Z-12
N0140 G0 X-18
N0150 Z5
N0160 M30
If you've already got the G-code, you don't need MasterCAM; just open it in the machine control program and run it. CAM programs like MasterCAM are for converting models or drawings into toolpaths which they then convert to G-code that runs on your machine.
Thanks to reply me......
sir i can use MasterCAM and i want to make the program off line with model when we generate the G Code from MasterCAM and send the machine, my machine not accept this MasterCam program... just i want to make program off line..... please help me.... again thanks
Master Cam Program..
N110 G0 T2020
N120 G18
N130 G97 S3600 M03
N140 G0 G54 X-18. Z5.
N150 G50 S3600
N160 G96 S550
N2980 G71 U.1 R.2
N2990 G71 P3000 Q3050 I0.1 K0.5 F.50
N3000 G0 X-2.2 S550
N3010 G1 Z-9.9
N3020 X-5.6
N3030 G2 X-6. Z-10.1 K-.2
N3040 G1 Z-11.1
N3050 X-16.
N3060 G0 Z5.
N3160 M30
Machine Controller Program (machine accept and work)
N0000 T0202
N0010 M3 S1000
N0020 G0 X-18 Z5
N0030 Z2
N0040 Z1
N0050 G72 X-2.2 I0.1 K0.3 P0080 Q0090 F115
N0060 G0 X-18
N0070 Z5
N0080 G1 X-2.2 F80
N0090 Z-9.9
N0100 G1 X-6
N0110 Z-11.1
N0120 G1 X-15
N0130 Z-12
N0140 G0 X-18
N0150 Z5
N0160 M30
advise me post processor
i have controller GSK 928 tea
The G18 in the Mastercam program suggests that you are creating the program in the XZ plane.Is that what you intended?
Not really clear what your request is...
Are you wanting to run the .mcam file on the machine ?
or
You want to modify the post processor to output a different .NC file that does make your machine run ?
or
Advice on what operation to use to get the desired .NC code ie G72 instead of G71 ?
i want to run MasterCAM Program....
i want to modify the post processor as per my machine controller program......
Quote:
Originally Posted by Superman
i want to run MasterCAM Program....
i want to modify the post processor as per my machine controller program......
OK... I'll biteQuote:
Originally Posted by ADNAN
Do you know how to program a lathe toolpath in Mastercam ?
G71 is a turning op, G72 is facing.... it appears it is programmer training problem, not a post mod requirement
...you need to correctly set the operation parameters to get the correct NC output. Or select the correct contour.
I think you need to make a sample .mcam file on mastercam and a good program that works on your machine and post them in here.Quote:
Originally Posted by ADNAN
I think your post in mastercam rightnow has a problem.
I have to make a program like this on master cam please help me i think i need to change the postprossar.....Quote:
Originally Posted by dannytnguyen89
N0000 T0202
N0010 M3 S1000
N0020 G0 X-18 Z5
N0030 Z2
N0040 Z1
N0050 G72 X-2.2 I0.1 K0.3 P0080 Q0090 F115
N0060 G0 X-18
N0070 Z5
N0080 G1 X-2.2 F80
N0090 Z-9.9
N0100 G1 X-6
N0110 Z-11.1
N0120 G1 X-15
N0130 Z-12
N0140 G0 X-18
N0150 Z5
N0160 M30
Quote:
Originally Posted by Superman
I have to make a program like this on master cam please help me i think i need to change the postprossar.....
N0000 T0202
N0010 M3 S1000
N0020 G0 X-18 Z5
N0030 Z2
N0040 Z1
N0050 G72 X-2.2 I0.1 K0.3 P0080 Q0090 F115
N0060 G0 X-18
N0070 Z5
N0080 G1 X-2.2 F80
N0090 Z-9.9
N0100 G1 X-6
N0110 Z-11.1
N0120 G1 X-15
N0130 Z-12
N0140 G0 X-18
N0150 Z5
N0160 M30