Guard door - Probe Heidenhain
Hello,
I have a question about the touch probe,
iTNC530
machine brand YCM, Nsv and other type.
here is the problem, we have recently stated too lock the guard doors and the operator cant use the probe with doors open.
but one machine can do this ( Matec).
so i was thinking, is this some way to fix this :)
with the security still working as it sopouse to .
sorry for my bad english.
Mr Larsson from Sweden
Re: Guard door - Probe Heidenhin
check the PLC status in the tool table (set of the 0 and 1 numbers for each tool) the difference may be there or in the MP's, but i'm not sure which one is it.
Re: Guard door - Probe Heidenhin
thanks steryd
i will check that tomoroow :)
re: Guard door - Probe Heidenhain
update
we did check and it was the same in all machines ?
that didnt work :(
Re: Guard door - Probe Heidenhain
Quote:
Originally Posted by
skucku99
Hello,
I have a question about the touch probe,
iTNC530
machine brand YCM, Nsv and other type.
here is the problem, we have recently stated too lock the guard doors and the operator cant use the probe with doors open.
but one machine can do this ( Matec).
so i was thinking, is this some way to fix this :)
with the security still working as it sopouse to .
sorry for my bad english.
Mr Larsson from Sweden
Find the related CNC parameter of the door guard sensor, try to disable by changing the parameter, or just disable the door guard sensor itself.
Re: Guard door - Probe Heidenhain
thank you for replying.
well its easy to cutout the guard door but we will not go back to that ;)
thats what we have been doing for many years and its ilegal hehehe.
trying to do the right thing here :)