Fanuc Om-417 X Axis Servo Alarm

Hi Friends,

I have JOHNFORD nc milling with FANUC OM controller.I have problem with it.It gives an error during machine start up.The monitor showed error:

- 417 x axis servo alarm.dgtl para
- 427 y axis servo alarm.dgtl para
- 437 z axis servo alarm.dgtl para

Can somebody help to stepdown this problem.Thank you

Your Servo motor Parameters are deleted. I think you are reloaded the parameters. Pl. check the following parameters and enter
X axis Y asix Zaxis
8100 8200 8300
8101 8201 8301
8102 8202 8302
8120 8220 8320 Motor type
8121 8221 8321 Load Inertia
8122 8222 8322 Direction
8123 8223 8323 pulse / rev
8124 8224 8324 pulse / rev

Pl. check the above parameters

Dear Friend,

Thank you for the information.I am new boy to cnc.How do i enter the parameter cause of the machine give an error during start up operations.

what keys i have to press to enter the parameter menu?

select MDI Mode
press para/ DGN Key
Select Parameter Page
Press Page down key
Select setting 2 page
move cursor to PWE - 0
enter PWE - 1
go to parameter 8100
and enter the apropriate values

if any problem to enter the value press Emergency and try

hi iam having with 95 model Chen ho mcv1000 with a fanuc om controller and i was told by fanuc that i need to get system parameters from 1 to 9000 in the pwe settings so if any one has these settings it would be much appreciated

servo alarm 417-427 437

I HAVE SERVO ALARM 417-427-437 AND I NEED PWE PARAMETERS 1TO 9000 AS THIS IS WHAT FANUC AUSTRALIA TOLD ME ANY GOT ANY IDEAS

THANKU DAVID

HI David en, can you fixed the problem you had with 417 and 427 alarms..? please let me know what did you do, please..? it looks like I have the same problem.
Thanks

hi
i have a machin CHEN HO fanuc O-MD
year 2000/01/24
model mcv-900
s/n 2000222
parametre lost and diagnostic lost
i dont have a parametre and diagnostic liste
i want to your help please

i have the same problem but i do not have the parameters
can you or soemone can help me to find the parameter list
thanks

you have problem with servo or in parametr machin

i have some parametro for machine cnc chen ho mcv 900

hi,
¿Do You can send me the parametro, that you have?. Thanks in advance!

Segio Gutiérrez

Hello everyone, I have a sogo machine with fanuc 18t control, Fanuc software has been uninstalled, I installed the software and I uploaded an old backup of parameters only. And I have errors. 404, 417. Please help me with that.

Quote:

---

Originally Posted by L. Sakthivel

Your Servo motor Parameters are deleted. I think you are reloaded the parameters. Pl. check the following parameters and enter
X axis Y asix Zaxis
8100 8200 8300
8101 8201 8301
8102 8202 8302
8120 8220 8320 Motor type
8121 8221 8321 Load Inertia
8122 8222 8322 Direction
8123 8223 8323 pulse / rev
8124 8224 8324 pulse / rev

Pl. check the above parameters

---

????
can you provide soft copy of above parameter ?

Quote:

---

Originally Posted by komikap

i have some parametro for machine cnc chen ho mcv 900

---

Hello, I'm looking for parameters for Chen ho mcv 900.Fanuc OM. Can you please help me?
Thank you

I have similar problems! I reset the parameters but now, I'm now getting "NOT Ready Alarm".
Any idea on what could be the issue, please?

Quote:

---

Originally Posted by L. Sakthivel

Your Servo motor Parameters are deleted. I think you are reloaded the parameters. Pl. check the following parameters and enter
X axis Y asix Zaxis
8100 8200 8300
8101 8201 8301
8102 8202 8302
8120 8220 8320 Motor type
8121 8221 8321 Load Inertia
8122 8222 8322 Direction
8123 8223 8323 pulse / rev
8124 8224 8324 pulse / rev

Pl. check the above parameters

---

I have similar issue, but now getting "NOT Ready" on the main screen. Thoughts please?