EX1047 Machine SPEC.PARAM.CLEARED.

Printable View

12-14-2014, 09:41 PM
Willydke

EX1047 Machine SPEC.PARAM.CLEARED.

We have an MV40M Fanuc MF-'MT (fanuc OMC=
It had a 910 parity alarm.
We cleared it
Loaded all the parameter and diagnostic
Now we have ab EX1047 Machine SPEC.PARAM.CLEARED
I know moriseiki protected this parameter with a diagnostic
I don{t have a print to ladder to resolv the problem
any person to help me with this the diagnostic o print to ladder to resolv the problem

Willydke
06-14-2015, 10:51 AM
[email protected]

Quote:

Originally Posted by Willydke

We have an MV40M Fanuc MF-'MT (fanuc OMC=
It had a 910 parity alarm.
We cleared it
Loaded all the parameter and diagnostic
Now we have ab EX1047 Machine SPEC.PARAM.CLEARED
I know moriseiki protected this parameter with a diagnostic
I don{t have a print to ladder to resolv the problem
any person to help me with this the diagnostic o print to ladder to resolv the problem

Willydke

Are there any advise for EX1047 message alrm after parameter import?

Thank Tu
06-14-2015, 05:33 PM
Willydke

Re: EX1047 Machine SPEC.PARAM.CLEARED.

I resol mo problem

- - - Updated - - -

my machine work
ok
09-27-2015, 06:53 AM
[email protected]

Quote:

Originally Posted by Willydke

I resol mo problem

- - - Updated - - -

my machine work
ok

can you help me to solve problem of EX1047 after parameter input. thanks, Tu
09-30-2015, 06:50 PM
mahendra24

Re: EX1047 Machine SPEC.PARAM.CLEARED.

can you help me solve this ex 1047 alar in moriseiki
08-23-2017, 10:37 AM
igorko

Hi Everyone,

I need help too.
Can you kindly share how to solve EX-1047 alarm?

I have input all parameters, except DIAGNOSTICS 0660-0669
It is impossible to input them.

Any help would be highly appreciated.

(Machine Mori-Seiki M300)
01-31-2018, 07:22 PM
aguzguerr

Re: EX1047 Machine SPEC.PARAM.CLEARED.

hola que tal como pudieron resolver su problema con ex 1047?
06-20-2018, 10:06 PM
DRETANAP

Re: EX1047 Machine SPEC.PARAM.CLEARED.

clear all parameters.
-input machine parameters and without turn off the machine input all pmc parameters.
-Turn off the machine

Probably some parameters of machine you will re input, because while are you enter the parameters the machine "want wich you turn off and turn on", but ignore them.

regards
12-19-2018, 10:14 PM
josue_support

Quote:

Originally Posted by aguzguerr

hola que tal como pudieron resolver su problema con ex 1047?

Que tal amigo como pudiste resolver el problema???
11-12-2020, 09:14 PM
rodrigomex

Re: EX1047 Machine SPEC.PARAM.CLEARED.

Quote:

Originally Posted by Willydke

I resol mo problem

- - - Updated - - -

my machine work
ok

Willy
Tengo problema con mi máquina, igual que tú, me aparece la alarma 1047 después de cargar los parámetros.
Crees que me puedas ayudar?
Saludos
Rodrigo
11-14-2020, 01:32 PM
DRETANAP

Quote:

Originally Posted by rodrigomex

Willy
Tengo problema con mi máquina, igual que tú, me aparece la alarma 1047 después de cargar los parámetros.
Crees que me puedas ayudar?
Saludos
Rodrigo

Primero borra nuevamente todos los parámetros. Después ingrésalos nuevamente, pero no vayas a apagar tu máquina aún.sin haber apagado tu máquina ingresa los parámetros del PMC. Ahora sí ya puedes apagar tu máquina y vuelve a reingresar los parámetros y ya la puedes apagar si la máquina te lo solicita.

Saludos
11-14-2020, 02:48 PM
rodrigomex

Quote:

Originally Posted by DRETANAP

Primero borra nuevamente todos los parámetros. Después ingrésalos nuevamente, pero no vayas a apagar tu máquina aún.sin haber apagado tu máquina ingresa los parámetros del PMC. Ahora sí ya puedes apagar tu máquina y vuelve a reingresar los parámetros y ya la puedes apagar si la máquina te lo solicita.

Saludos

Muchas gracias.
Hoy lo intentaré a ver cómo me va.
Saludos.
02-19-2023, 03:46 PM
Braided1122

Hello my friend
Can you reply me please how you resolved your
Ex1047 alarm of Mori seiki please help me thanks
03-28-2023, 10:00 AM
kesitmakine

Re: EX1047 Machine SPEC.PARAM.CLEARED.

Hi,
same problem mine MVC65-40 vmc machine
Please help me , how you fix error ?
03-28-2023, 10:01 AM
kesitmakine

Re: EX1047 Machine SPEC.PARAM.CLEARED.

Quote:

Originally Posted by Willydke

I resol mo problem

- - - Updated - - -

my machine work
ok

Hi,
same problem mine MVC65-40 vmc machine
Please help me , how you fix error ?