I HAVE A SUPERMAX FANUC OM ,WITH 4TH AXIS ROTARY I WANT TO CUT A CAM OF 50MM DIA AND 20 MM LIFT BETWEEN LOW AND HIGH POINTS .ANY ONE HERE TO HELP WITH A SAMPLE PROGRAMME .I AM ENCLOSING THE PIC OF THE CAM ALSO .
SO ANY ONE HELP WITH SOME SOFTWARE TIPS HOW TO CUT THE TOOL PATH I WANT TO USE 6MM END MILL FOR CUTTING AND 10MM BALL NOSE FOR CONTOURING .
THANKS
VINOD
Sent from my GT-N7100 using Tapatalk 2
