Meldas-M0 Reset on Leadwell MCV-0
I have a brain dead Leadwell MCV-0 machine. When the screen comes up, it stays frozen on the position screen. Is there a way to do a reset on the system? I have looked far and wide to no avail, this system is so old not even meau.com has any documention. My hope was to find a switch or setting that would clear the system (I have a hard copy of the parameters).
If any knows where to get replacement boards that would be very helpful also, I may need to replace the CPU (GX-25) and memory board (GX-40). The memory board is indicating a parity error.
Thanks.
Machine builder parameters
When I open the parameters with h1000-2=1 and enter 2 times , then 1 and push the top parameter key, I get 3 pages of inputs suppied by the machine tool builder. It contains things like the labels for the axis. It also contains the options for the machine. This is the toughest thing to get right. It may also contain the baud rate for entering the rest of the parameters for h1001-7=1. Does anyone have any of these parameters they can post?
Bob
Re: Meldas-M0 Reset on Leadwell MCV-0
Hi I have a 1987 mighty comet with meldas mo control do you have the parameters for your meldas? I really need the parameters to get my machine running.
Re: Meldas-M0 Reset on Leadwell MCV-0
Hi every ad! I have the same controller meladas m0. .but I have problems with Japan language. I want change to English language. Help me!!!!!
1 Attachment(s)
Re: Meldas-M0 Reset on Leadwell MCV-0
Quote:
Originally Posted by
Arakow
Hi I have a 1987 mighty comet with meldas mo control do you have the parameters for your meldas? I really need the parameters to get my machine running.
you can see my parameter: Attachment 335654
This one mori seiki with mitsubishi meldas M0.
Re: Meldas-M0 Reset on Leadwell MCV-0
Cool thank you, however someone has already given me the parameters and my machine is running
Sent from my iPhone using Tapatalk
Re: Meldas-M0 Reset on Leadwell MCV-0
Quote:
Originally Posted by
Arakow
Cool thank you, however someone has already given me the parameters and my machine is running
Sent from my iPhone using Tapatalk
Can you help me with this parameter? my email: [email protected]
Re: Meldas-M0 Reset on Leadwell MCV-0
WHAT DO YOU WANT ABOUT THIS PARAMETTER.?
Re: Meldas-M0 Reset on Leadwell MCV-0
Quote:
Originally Posted by
xtc_bk
WHAT DO YOU WANT ABOUT THIS PARAMETTER.?
battery of my machine death. so i need reload all parameter.