Re: okuma svp problems AGAIN
Check your entire tool change cycle. If there are no hits, if tool comes into the spindle nose centered.
It happens when machine is not leveled for a long time and level is lost. Sure, can be more reasons of tool change missalignment.
Re: okuma svp problems AGAIN
The machine seems to be level. As soon as the tool carousel starts to rotate, during a tool change, it throws up a svp alarm. 2010-11 Alarm B svp check MAaxis E453E452
Re: okuma svp problems AGAIN
are tools distributed equaly in the carousel?
Can you move the empty carousel outside the tool change cycle?
Re: okuma svp problems AGAIN
tools carousel is empty and like i said as soon as it begins to turn, the alarm pops up. Even in manual mode.