Brother TC-321N Manuals and parameters
Hi guys, new to cnc zone. I just took a gamble buying an old brother tc-321 year 1990 with brother 500 control. Got it back to the shop and hooked up, and it turns on, that is about it. It came with no manuals, information or parameters.
First thing that comes up is error 39-no parameters data, 37 key board error, 140 deviation error, 387 no tool menu data. Any help or information on this machine, and these errors would be greatly helpful. Thank you
Re: Brother TC-321N Manuals and parameters
Quote:
Originally Posted by
schristooo
Hi jolulank,
I already got it solved, I found somebody here in germany who is hopefully sending me the complete set of manuals.
Thanks for your offer, I might come back to it, if it does not work out.
Best Regards
schristooo
Dear schristoooo
Could you sent me the manual via e-mail: [email protected]
Thanks so much.
Re: Brother TC-321N Manuals and parameters
Quote:
Originally Posted by
schristooo
Hi jolulank,
I already got it solved, I found somebody here in germany who is hopefully sending me the complete set of manuals.
Thanks for your offer, I might come back to it, if it does not work out.
Best Regards
schristooo
hii.. i also need tc-321 manual...
can you help me??
its my email..
[email protected]
thanks
Re: Brother TC-321N Manuals and parameters
Hello, I'm in trouble with a TC-321N. No display at all on the controller. Kind like to ask if someone can send me the Maintenance Manual of this machine. If someone could send me the manual to [email protected] , it would be really great.
Thanks
Re: Brother TC-321N Manuals and parameters
Hi jolulank! I got a Brother TC 321N and I am searching for maintenance and user manual for a while now, but cannot find any.
If you could send these manuals, it would be really great.
Mr_Long.
Re: Brother TC-321N Manuals and parameters
Quote:
Originally Posted by
jolulank
Thanks for reply. Please check email.
Re: Brother TC-321N Manuals and parameters
Hi everybody,
This is very old theme, but I have the same problem on TC-321N - No39 no param data, 142- deviation error, 167-index magazine error, 387- no tool data, cnc-500.
I would be very grateful if someone can help me to cope with this. We changed batteries every year, but now alarm appeared with listed errors.
Thank you in advance.
Re: Brother TC-321N Manuals and parameters
Quote:
Originally Posted by
schristooo
Hi jolulank,
I already got it solved, I found somebody here in germany who is hopefully sending me the complete set of manuals.
Thanks for your offer, I might come back to it, if it does not work out.
Best Regards
schristooo
Hi , can you send me too please ?
[email protected]
Thanks