when i switch All axis home button ..the y axis and z axis move finely
but x -axis does not move until y-axis move completly.after that X-AXIS move slowly in postive (opposite direction) showing postive adjust on Dsp controller
Printable View
when i switch All axis home button ..the y axis and z axis move finely
but x -axis does not move until y-axis move completly.after that X-AXIS move slowly in postive (opposite direction) showing postive adjust on Dsp controller
Go to the setting and give order how you want it. And check reverse direction on X
Mr. Sidique,
Try following steps.
1. While homing as you say X axis goes in wrong direction, let it go for a small distance.
2. touch the X limit switch manually with any metal object (like a steel footrule). Home manually in X.
3. Now again change the home direction setting for X.
4. Turn off the m/c.
5. Restart the m/c and it should home in opposite direction. Ideally Z should home first, then X-Y simultaneously as per default settings.
How long have you been using this machine? Is this a recent problem? What is your location?
regards,
Snehal Shah