Printable View
was cutting small project 5 in by 5 in and power supply browned out, meaning fluxuated and machine now wants to cut project size of 12 in by 12 in,I can't get it to reset to original size of 5 by 5. have reset all parameters on machine and reloaded program from computer to usb stick and it still wants to cut 12 by 12. can anyone please advise me what to do?
Some info about your machine might help.
change them back maybe to before you changed themQuote:
Originally Posted by newtothiscnc
i have a STG6090 4 axes from Style company out of beijing chinaQuote:
Originally Posted by ger21
water cooled spindal 220 VOLT plus have converter for 110 volt US to 220 volt europian
with a DSP A11E controller
did that no changeQuote:
Originally Posted by machinehop5
I have also gone back into my collection and pick a project that I have completed successfully. and I cannot get it to recognize it. it just waants to go back to the 12 by 12
What cam package are u using? Are u sure the power supply issue is fixed? What caused the power issue?
Quote:
Originally Posted by newtothiscnc
It might have corrupted the steps per unit settings when the power went sideways. Have you checked that, by commanding a move of known length and comparing expectation to achievement?