So a customer asked me to repair a diy machine he bought a while back. He has a lot of issues with this machine. Once it arrives at my place i will post photo's, must say i am very excited to fix the machine.
For now i stripped the old control panel, cleaned the parts. Next i will power up the HY drive and make sure all the parameters are set correctly:)
https://www.cnczone.com/forums/attac...d=421704&stc=1https://www.cnczone.com/forums/attac...d=421706&stc=1https://www.cnczone.com/forums/attac...d=421708&stc=1https://www.cnczone.com/forums/attac...d=421710&stc=1https://www.cnczone.com/forums/attac...d=421712&stc=1