Xilog Maestro - 3 questions
Hello people. :)
I have two questions, but first I'll explain some details.
The machine I'm working with is SCM Morbidelli Author m400. The softwere I'm using is Xilog Maestro and Xilog Plus.
1. Can I use more then one drill bits at a time ? I mean drilling 3 or more holes with distance, the distance between the bits(32mm) in the same time ? // in Maestro //
2. The second question is about same thing. Can I do that in MSL (Maestro Scripting Language) ? // in macros for Maestro //
3. Since I have not enough time to experiment with Maestro at work, I installed it at my personal computer. Everything works fine, but I have a problem- I can't import the def.tlg and def.tlgx files in Maestro ( the files which contains the information about my tools). Is that because I have not installed Xilog Plus at my personal computer or what ? Any ideas ?
Thanks for any help :)
Re: Xilog Maestro - 3 questions
Hello Service SCM BR. Thank you very much for the information ! I am just not sure what you mean in your answer number 3. Correct me if I'm wrong : I must have Xilog Plus (installed... not just copied) and then I have to copy/paste the tlgx folder ? Yes ? I tried to copy/paste the tlgx folder but it doesn't work. If I understand you correctly, I must find Xilog Plus installation. Thank you again.
Re: Xilog Maestro - 3 questions
Hello, Moschino.
When I referred to import or export, this procedure is done inside the Xilog Maestro.
However, in order to perform this procedure, the two software packages are required.
When you only have Maestro and need the tools (def.tlgx) you can not perform the import or export procedure.
And yes you should copy the file inside the tlgx folders of the machine and paste inside the tlgx folders of your Personal Computer.
Only in this way will you have the tools register also on your PC besides the machine. Understood?
Re: Xilog Maestro - 3 questions