Re: Ht20sii Rs232 connection
...try this
Inputting CNC Programs:
Set mode switch to EDIT.
Press PROG button.
Press Reset.
Type in program number, such as 1234
Press IN.
-------------------
Outputting CNC Programs:
Set mode switch to EDIT.
Press PROG button.
Press Reset.
Type in O number to output. (O1234)
Press OUT.
Re: Ht20sii Rs232 connection
...this website looks like some good information for you. Most of the time a standard "Null Modem" type cable for transfers is used CNC to PC.
https://factorywiz.zohodesk.com/port...ation-document
I think the only differences I see from your Params to the Factorywiz is #6003D3 for EOB is LF vs CRLF
Baud rate 9600 should work.
Re: Ht20sii Rs232 connection
I actually got some info off that website !
I think my lathe might be slightly different.
I have no options on the NC side to output or input.
My only options are on the multi side of the control, and I access it by the following.
1. Edit mode
2.Operation or Maintenance
3. Editing
4. Option 1 - punch out. Option 2 - nc Input register
5. Set baud, data stops, control ( available or used )
6. Input prg #
7. Name prg
8. Machine waits for input/ output
I’ve checked the continuity from rs232 port1, to the Honda cn6 connecter on the mb22 motherboard, and all pins are connected.
My laptop transfers perfectly to my other lathe.
I’m not sure if it’s the cable
( I’ve ordered a new one I’m waiting for it)
Or if there is another problem that I don’t know how to diagnose.
Sent from my iPhone using Tapatalk Pro
Re: Ht20sii Rs232 connection
Okay guys ! My my whining is over haha
The micro dnc2 worked, I don’t know if the box is magic or the cable is different but it’s working.
Param 6002 : 10000000 = 128
Param 6003 : 00010001 = 17
Param 6026-6029 : 00011001 = 25
( rs232C,baude4800,control code used, stop bits 2, (data bit 7, parity even.. on pc side) )
Micro dnc 5 stars
Sent from my iPhone using Tapatalk Pro