Mitutoyo Touch probe MTP1 321 010 wiring

wiring of a MTP 1

two leds, 4 pins on the device going to a 5 pin

Attachment 383306

Attachment 383308

red goes to probe side A pressure plate NC
yellow goes to probe side B, attaches via the screw and a wire tag at the back NC

orange led1
brown led2

led1 + led2 are connected together

looking at front of probe, into 4 pin probe pointing down

AB
CD

A = YELLOW goes to probe
C = ORANGE LED1
B = BROWN LED2
D = RED to probe


red attaches to other side of probe
Attachment 383310


yellow connects here, to bolt that attaches to probe
Attachment 383312

yellow connects here, to bolt that attaches to probe
Attachment 383314

Attachment 383316

hirose connectors
Attachment 383318

might be RM series
https://www.mouser.com/ProductDetail...IrZoAAFA%3D%3D