Rabbit/lasercut rotary settings

Hi all,

I'm looking for some help with my XZ-M-I rotary attachemnt settings.

Fom what I understand I have to change the Y-axis Pulse Unit setting to work the attachemnt.

Could anyone tell me how to calculate that setting based on diameter of the lasered item.

I'm using Lasercut 5.1 on a 4060 SE 40W

Many thanks

Dave.

On my WK Laser machine the formula was 3.14*D/2 and insert that number where it shows in the picture below.

Skip

Quote:

---

Originally Posted by SkipW

On my WK Laser machine the formula was 3.14*D/2 and insert that number where it shows in the picture below.

Skip

---

Hi Skip,

Many thanks for the reply.

As soon as I saw your post I jumped up with excitement to go try it.

Unfortunately, it didn't work for me.

My test engraving is a circular graphic which is 40.5mm dia on to a 66mm dia glass. With the formula you suggested I get an oval about 21mm wide.

I did some trials using smaller values untill I got it right but of coarse, it was only good with that particular dia.

Thanks for trying.

Dave.

Wauw.....
i still not realize this.
i just using my rotary attachment, and not change any setting on machine.
but as far as, it's look fine on my machine. i could engraving on glass and cutting cylinder acrylic.

Quote:

---

Originally Posted by Huahahahahaha

Wauw.....
i still not realize this.
i just using my rotary attachment, and not change any setting on machine.
but as far as, it's look fine on my machine. i could engraving on glass and cutting cylinder acrylic.

---

You are fortunate that it work out that way. The problem you will have is if you go bigger in diameter, you will end up with a narrow image.

Dave.

I have a lasser rabbit rotary but i do not need changed anything. I connect the rotary in the X controler and work good

Quote:

---

Originally Posted by edecalho

I have a lasser rabbit rotary but i do not need changed anything. I connect the rotary in the X controler and work good

---

Thanks for you input.

Could you tell me what the various diameters are that you use with this, and is it the XZ-M-I rotary attachemnt.

Many thanks

Dave

I attach pictures of my rotary. I changed to allow recording cylinders with grip objects. If I have problems when the objects are not perfect or cylindrical shapes with irregular. Cylinders to be swiveled by the roller bearing the same gear ratio, so it is not necessary to make any change in the configuration of the shaft.

Sorry but my english it´s bud

Eduardo
Montevideo - Uruguay
Por si alguien habla en español
MSN [email protected]

dave

Ask the Rabbit company to give the value of the stepper motor so, you can input the right value. It looks the stepper motors in the machine (X and Y) is not the same as in the rotary attachement.

Muqtadir

Quote:

---

Originally Posted by muqtadir

dave

Ask the Rabbit company to give the value of the stepper motor so, you can input the right value. It looks the stepper motors in the machine (X and Y) is not the same as in the rotary attachement.

Muqtadir

---

Muqtadir,
Thanks for the suggestion. Looks like I have to do just that.

In the meantime I'm going to experiment to try to find the answer.

Thanks again

Dave

Quote:

---

Originally Posted by SkipW

On my WK Laser machine the formula was 3.14*D/2 and insert that number where it shows in the picture below.

---

Er, the circumference of a circle is Pi x D = 3.1416 x Diameter

That might give a better looking circle.

Dave

please i have a problem with laser cut 5.3

when i Cut a square 100 x 100 the result 8.3 x 8.2
i cheked my machine
work table PULSE UNIT : 0.0039656250 MOVE 50.760000 NEED PULSE 12800

Hi Skip,

yes you are right , and when machine dleiver we will put a roitary use manuual with along with mahcine it is easy for user to operate.
also on our web there are all use mannual for customer to dlowlaod ,help them with their machine .

Quiven form gweike alser
skype: wkquiven
[email protected]
whatsApp:86-15698041856