Mazak 6200Y 26 illegal parameter

hi good day

we have a machine here a Mazak 6200Y/mazatrol 640T.. it loads a UI but there a asterisk display after that the alarm appears and maybe someone has an idea this kind of alarm "26 illegal parameter". im planning to reset servo/spindle parameter but we didnt know how to do it..we just only want to try maybe could
work on that way.. thanks

Quote:

---

Originally Posted by leiryll

hi good day

we have a machine here a Mazak 6200Y/mazatrol 640T.. it loads a UI but there a asterisk display after that the alarm appears and maybe someone has an idea this kind of alarm "26 illegal parameter". im planning to reset servo/spindle parameter but we didnt know how to do it..we just only want to try maybe could
work on that way.. thanks

---

Hi,

can you give some pictures of the monitor, may be also alarm history.

best regards
mazak-user

im sorry idont have screenshots.. but have these...

Description Type

26 illegal parameter servo/spindle
17 2 port memory parity MCP
351 spindle contactor fault machine
381 COND. Missing(Set up SW) machine
121 overtravel NC
491 maint. check warning operate

well.. i changed the battery already from NC panel which is already dead.. the next thing is to load parameter of a machine that i dont know yet.. and we have a diskette and memory card that we also found from back portion of a NC/MCP panel.

Quote:

---

Originally Posted by leiryll

im sorry idont have screenshots.. but have these...

Description Type

26 illegal parameter servo/spindle
17 2 port memory parity MCP
351 spindle contactor fault machine
381 COND. Missing(Set up SW) machine
121 overtravel NC
491 maint. check warning operate

well.. i changed the battery already from NC panel which is already dead.. the next thing is to load parameter of a machine that i dont know yet.. and we have a diskette and memory card that we also found from back portion of a NC/MCP panel.

---

Hi,

what type of control you have?
T-Plus or Fusion 640TM

best regards
mazak user

Quote:

---

Originally Posted by mazak-user

Hi,

what type of control you have?
T-Plus or Fusion 640TM

best regards
mazak user

---

fusion 640T..

Hi,
If you switch on the main breaker, and then push the on button on the control, start on windows or not?

Quote:

---

Originally Posted by mazak-user

Hi,
If you switch on the main breaker, and then push the on button on the control, start on windows or not?

---

yes it is.. the Windows OS load and its UI..and you cant shutdown by pressing a button.. just machine main breaker.. and the problem is, there's an error appear on screen. the spindle and servo module has its on flickering error too but i figure out that the modules has no concern on it. because i saw some garbage text and number displayed on MCP,it display some are asterisk.. some what i thought maybe the machine NC parameter been corrupt... so i planned to overwrite the parameter and reboot again..

Hi,
give me your mailadress.

Quote:

---

Originally Posted by mazak-user

Hi,
give me your mailadress.

---

[email protected]

thanks for the guide it helps me alot

Quote:

---

Originally Posted by leiryll

thanks for the guide it helps me alot

---

Its Ok.
Best regards
Mazak-user

Is some body still there
Now I have the same problem in my Mazak 620 T Plus control
26 illegal parameter servo/spindle

Any idea how fix it?

Thanks a lot

Quote:

---

Originally Posted by torresr

Is some body still there
Now I have the same problem in my Mazak 620 T Plus control
26 illegal parameter servo/spindle

Any idea how fix it?

Thanks a lot

---

I'm now in the same boat. I have this error on my 1998 QT250HP Fusion 640T. Is this a reload the backed up parameters type of thing or is it something different? Any help would be greatly appreciated. Thanks in advance!
Error reads as follows
26 ILLEGAL PARAMETER( 1, 36,&0037)