Mazak post for mill turn

I am either purchasing a Mazak sqt15ms with c axis and subspindle with t-32-3 control does not have EIA enabled or an Integrex with tplus control, EIA option enabled, c and y axis / tailstock. I currently use Inventor with HSM. The only other CNC machine I have at the moment is a Milltronics VM17. I am trying to figure out the best method or getting a post for one of these machines.

I like the Integrex but I am worried it is to much of a machine for me to start out on. I only have manual lathe experience and only about 6 months of cnc on the mill.

I would contact HSM support at AutoDesk, they are normally very responsive in helping and creating post processors for various machines.

Quote:

---

Originally Posted by Jim Dawson

I would contact HSM support at AutoDesk, they are normally very responsive in helping and creating post processors for various machines.

---

I ended up getting a sqt18m with t plus control. I have emailed autodesk but they did not have one. They did mention someone was working on a post at one point.

We created a postprocessor for the Integrex that runs very nice, but as I read, that too late now. Good luck with your new machine.


https://www.youtube.com/watch?v=TBIM-XONU_Q