Re: 6amp 60v 10 microstep bipolar drive
Quote:
Originally Posted by
tivoidethuong
i was try with H500 verilog code with emp240, it work well
EPM240 evelution board i was use
Attachment 350646
Working from a dev-board is a good starting place as you can move pins around easier than remaking a PCB.
Do you have a working driver with good results or just getting the code working on the dev-board?
Re: 6amp 60v 10 microstep bipolar drive
Quote:
Originally Posted by
websrvr
Working from a dev-board is a good starting place as you can move pins around easier than remaking a PCB.
Do you have a working driver with good results or just getting the code working on the dev-board?
code work well, i dont have time to finish layout
1 Attachment(s)
Re: 6amp 60v 10 microstep bipolar drive
to websrvr
point 2 point test, I have not started layout yet
Attachment 363000
https://www.youtube.com/watch?v=nTvYK4T5MBE
2 Attachment(s)
Re: 6amp 60v 10 microstep bipolar drive
this is a quick drawring EMP240
i believe it works well with the H bridge in previous topic