My RG 80 Press Brake will not go above 20 tons on a bend. I get no alarms or indication of problem. Has anyone had this issue?
Printable View
My RG 80 Press Brake will not go above 20 tons on a bend. I get no alarms or indication of problem. Has anyone had this issue?
Check oil levels....
Check the relief valve on the left end. Also the adjusting bolt that pushes the rod into the distribution valve might have worked loose.
Hope this helps,
Tom
Mister NCT has suggested just what to do, The rod that connects your bar pedal to the valve rides on a bolt with a jam nut. You only want to take up the play, so you should still be able to spin the rod with two fingers.
The problem was the relief valve. Thank you for your help!!
you can read the press brake troubleshooting article, it list 17 common problems and the solutions: https://machinemfg.com/17-press-brak...sons-measures/
Nice article!Quote:
Originally Posted by MachineMfg
Maybe this article can help you?
https://blog.harsle.com/how-to-avoid...ng-problems-2/