Please I need help I have a machine MORBIDELLI u46 since 1991

Please I need help.

I have a machine MORBIDELLI u46 since 1991
I must know how to find a program in which they can prepare drawings in
1d, 2d and 3d.

Since my machine to make the cut. I want to say that the machines
make cuts that are set by the program.

Program that you propose please tell me where I have to do the installation on a computer or program that owns the machine.
How to save the file and transfer the design to the machine.

MORBIDELLI u46 year 1991 version 63


Please have the opportunity to be prepared to help as any cutting and how to send fili the machine that machine to do work that I ask from it.
I do not speak good English sorry.

Hope all the best going with dihmoni about the program.

the sofware is Aspan o Alphacam

dear sir ,
as i known you are having U46 morbidelli,

i also having one machine brand morbidelli model U40,
but i have lost my ladder diagram.

can you help me up to have this ladder diagram??

and i have some problem with this machine,
there is no screen when this machine power on.
and can not reset to return home.

thanks for reply, and help me up.

I've installed the beginning now works perfect.
The problem remained to program one or I have changed the figures of the program and have the following error.

But now is OK

I dont understand the problem!!! the screen the machine do no turn on? or do no reset for return home position?

And it is hard to understand,because I speak English but I make spelling mistakes

In the event that I have prepared a design in ARTCAM PRO and save us. PGM 3MB
How to transfer from computer to machine

Machine is only with the floppy.


Show me an example if you can how to transfer file. PGM from the computer in the machine.

Morbidelli is just with floppy disk.



Hopefully that will help

Can you send me a copy the your program? I would like only as example
Can you send me some pic of the CRT?

hi i all so have a u46 and the monitor i dead and i have no manuals or instructions
would be gratfull for some help or to be pointed in the right direction

thanks

pls i have morbadilli u 26 model 1991 i want to know how i can run it by artcam pro but it is with floppy desk i want quick replay pls