TRAUB TX7 serial connection
I managed to read from the tx7 controller to PC via serial connection.
But when i try to set the tx7 to accept incoming data from pc i have error 75 (tape recorder error).
If i disable RTR from machine parameters (55:00001101) i don't get the error but it's doing nothing when i activate program input and send .nc file via DNC precisionhttps://uploads.tapatalk-cdn.com/202...accb9bc08a.jpghttps://uploads.tapatalk-cdn.com/202...7374cd23d1.jpghttps://uploads.tapatalk-cdn.com/202...1ac9dc0cd0.jpghttps://uploads.tapatalk-cdn.com/202...766c6857e6.jpg
Sent from my SM-A705FN using Tapatalk
Re: TRAUB TX7 serial connection
maybe it needs a % sign at Beginning or just a Blank Line.
Try to send the same Program back to CNC that you sent to the PC
Re: TRAUB TX7 serial connection
I've tried to send the same program. But the tape error apears instantaneus after i pres the key combination. Maybe i need to make some other bridge in the DB25 connector to fool it that the tape player is OK. Or i dont know what could be the problem.
Sent from my SM-A705FN using Tapatalk