1 Attachment(s)
Postprocessor modification
Hello,
Can anybody help me with postprocesor modification for mastercam lathe with live tooling.(fanuc post)
When I use cross driling I receive wrong tool number:
Should be like T0808- I receive in program T0800. I found out that postprocesor take diameter offset instead lenght offset.
For the drills diameter offset is zero and I receive 00...
I attached also post in word document.
Thank you for help,
Regards, dami
Re: Postprocessor modification
Hello,
I forget to mention that I use Mastercam X5 software.
Can Anybody help me with this??
BRD
Re: Postprocessor modification
send me post, i'll see
[email protected]