Printable View
I want to take SRAM backup to USB pendrive on Fanuc CNC lathe machine.
Model number Oi Mate TD (D7 F1-34.0).
System Monitor Main Menu shows 'Memory card not exist', though i have changed I/O channel 17 and pendrive is plunged in.
Should i change any parameters to take SRAM backup to USB pendrive?
Can any one help me about this problem?
I am a little confused by the title "DRPINT IN MEMORY CARD....".
From what you described, it sounds like you want to make an SRAM backup of the machine memory to a USB device? This is normally done in the boot screen using a memory card. The boot screen does not support USB.
You can make an SRAM backup to a USB device but you will need to boot up in IPL mode.
Hold " - " (minus) and " . " (decimal) in while booting up. It takes some time for the screen to appear so be patient.
Select BATCH DATA BACKUP / RESTORE (12)
Select BATCH DATA BACKUP CNC TO USB MEMORY (11)
You can also restore the SRAM from IPL
Shoprag
Thanks a lot.