Hi. Does anybody have a Okuma postprocessor for Cimatron ?
thanks
Printable View
Hi. Does anybody have a Okuma postprocessor for Cimatron ?
thanks
Ηello.Could you please add the post processor for Roland MDX-40A
i need Fanuc 0i postprocesor for Visi...pls
Does anyone have a OKK VC-X350 5 axis post processor?
Looking for a VECTRIC ASPIRE Post Process for a ECS14001
Thank you
Hello, do you have a post processor , PLM1000.PST . PLEASE HELP
hello, does anyone have a post for alphacam that can run the 4-axis on mach3??
thank you.
Dears,
Kindly anyone can help me to get the post processor for DMU 75 (5-axis machine) HEIDENHEIN TNC640 controller to work with CAMWorks programming software.
Thanks,
Khalid
Dear Claudiu,
Can you help me please to get the post processor for DMU 75 (5-axis machine) HEIDENHEIN TNC640 controller to work with CAMWorks programming software.
Thanks,
Khalid
Anybody ever wonder why none of these ever get answered? Because this a sub-forum under SheetCAM for SheetCAM users to get post processors for SHEETCAM. Not for CAMWorks, not for AlphaCAM , not Vectric . If you need a POST for anything else than SheetCAM it will be ignored . So you need to go to the vendor of the CAM program you use and get the post you need , or to a list or forum for the Machine or CAM package you use . I know the title says "All Post Processors" but it should be "All Post Processors for SheetCAM".
hello there, does anyone have artcam postprocessor for Morbidelli Author 500 (Kvara 30) which accepts (.prg files)?
Here are some of mine post processors for esprit:
Spinner - 3 axis, TOS WHQ13 - only 3 axis, DOOSAN HM-800 - 4 axis, MAKINO MC45 - 4 axis and HAAS UMC-750 - 5 axis.
DOOSAN and MAKINO are using macro variables to call tools and their length and radius compensations. Both of them are using sub programs on machine to calculate coordinate system transformation around B axis.
UMC-750 only uses macros for tool calls and compensations.
Spinner uses variables to call tools by name. Not by number.
I didn't write any of them. I just edited them.