i'v the same problem , and it become frequent , and each time different , now the arm is blocked in a position just before taking the tool .. wht is the koz of this problem . pliz help.
Printable View
i'v the same problem , and it become frequent , and each time different , now the arm is blocked in a position just before taking the tool .. wht is the koz of this problem . pliz help.
Had the same problem on vmx50. Ended up being the motor brake was bad. Replaced motor. If exchange arm does not stop completely at 0 or 60, the prox sensor is not read. Exchange arm on vmx50 would bounce when returning to 0 causing the timing to be off. Besides this issue, i have had way to many other issues with the 4 other Hurcos we have. Not happy at all with service or part availability.