Re: Looking to pull the CNC conversion trigger
A quick engraving job tonight to see how things would come out. Mach4 seemed to freeze with the one gcode can bam put out asking for a tool change pause. Not sure why-- I deleted the tool number and description and then redid the code. Worked as it should that time.
http://uploads.tapatalk-cdn.com/2016...018a2104bf.jpg
Sent from my VS985 4G using Tapatalk
Re: Looking to pull the CNC conversion trigger
I'm trying to get the post processor to work with Fusion 360 but keep getting a failed output code. Here's what I'm seeing for a simple flycutting opperation, 2 pass, .020" deep. I have Mach4, but that's not an option of a post processor output, only Mach3. I'm not quite sure what else I'm missing here -
Information: Configuration: Generic Mach3Mill
Information: Vendor: Artsoft
Information: Posting intermediate data to 'C:\Users\Owner\AppData\Local\Fusion 360 CAM\nc\1001.tap'
Information: Total number of warnings: 1
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Friday, July 22, 2016 1:31:19 AM
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.2.1 40927
Configuration path: C:\Users\Owner\AppData\Local\Autodesk\webdeploy\pr oduction\f61ab1dfd94b3aa875226de3a402c49fbd3874b6\ Applications\CAM360\Data\Posts\mach3mill.cps
Include paths: C:\Users\Owner\AppData\Local\Autodesk\webdeploy\pr oduction\f61ab1dfd94b3aa875226de3a402c49fbd3874b6\ Applications\CAM360\Data\Posts
Configuration modification date: Thursday, June 02, 2016 7:33:38 PM
Output path: C:\Users\Owner\AppData\Local\Fusion 360 CAM\nc\1001.tap
Checksum of intermediate NC data: f081d3a33c3f1b9b27ebee2b5e377980
Checksum of configuration: 7d0b9ca9d2b54f29ab3f878eb9efb238
Vendor url: Newfangled Solutions » CNC Software Home of Mach3
Legal: Copyright (C) 2012-2016 by Autodesk, Inc.
Post processor signature could not be verified (error 0xfffffffc).
Generated by: Fusion 360 CAM 2.0.2204
...
Warning: Work offset has not been specified. Using G54 as WCS.
Error: Invalid coolant mode
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Friday, July 22, 2016 1:31:20 AM
Post processing failed.
Re: Looking to pull the CNC conversion trigger
Thank you for a well-documented log, bud, will come in handy when I tackle the mechanical side on mine.
Top effort, luv it.
Cheers,
Beano
Re: Looking to pull the CNC conversion trigger
I think I found the error with the above code. I disabled coolant in the setup options for each step and it looks to be good to go.
Re: Looking to pull the CNC conversion trigger
Tagged
sent from the Honey Badger Galaxy
Re: Looking to pull the CNC conversion trigger
Added a new accessory to the arsenal and gave it a try today.
http://uploads.tapatalk-cdn.com/2016...c26da19a46.jpg
Re: Looking to pull the CNC conversion trigger
Made a little progress with the machine, but not as fast as I wish I could. I began mounting and running the oiling pump and lines and secured the limit switch lines, so basically there was a lot of drilling and tapping of cast iron.
I also hooked up my compressed air to some eBay nozzles and an old regulator to use for cooling and chip clearing. This required me to cut and reweld the mounting flange for the mills original flood coolant bracket when I wanted to move it to the left side of the machine.
http://uploads.tapatalk-cdn.com/2016...3068b6ecc5.jpg
http://uploads.tapatalk-cdn.com/2016...6ef6b7d318.jpg
http://uploads.tapatalk-cdn.com/2016...8be5d69551.jpg
http://uploads.tapatalk-cdn.com/2016...635488817b.jpg
http://uploads.tapatalk-cdn.com/2016...de70e8cf12.jpg
http://uploads.tapatalk-cdn.com/2016...7247f2534e.jpg
Re: Looking to pull the CNC conversion trigger
Swapped out the temporary chip clearing air supply line with a slimmer coiled line.
http://uploads.tapatalk-cdn.com/2016...bc59f3b296.jpg
I also made some progress with the oil supply lines for the ways and ballscrews. I'm not in love with how I think the ballscrew oil lines will work but I'll wait and see if they're an issue. The z screw oil line I still need to finish.
http://uploads.tapatalk-cdn.com/2016...b9ab4210aa.jpg
http://uploads.tapatalk-cdn.com/2016...4e156ca39c.jpg
http://uploads.tapatalk-cdn.com/2016...47fc6851df.jpg
Last week I also bent up a table extension cover ala tormach style so I'm excited to mount that permanent.
http://uploads.tapatalk-cdn.com/2016...22caa5a91d.jpg
http://uploads.tapatalk-cdn.com/2016...f353a25e97.jpg
Sent from my VS985 4G using Tapatalk
Re: Looking to pull the CNC conversion trigger
Re: Looking to pull the CNC conversion trigger
Re: Looking to pull the CNC conversion trigger
Re: Looking to pull the CNC conversion trigger
Because why not be a cnc newbie and jump into 3d machining, ha! My cam definitely needs some work. The cross hatch look was intentional but the 3 notches on the side weren't.
http://uploads.tapatalk-cdn.com/2016...fefefc194d.jpg