Only 2003 X crc=1 and stb=1, all others are 0.
This morning I tried some g84 cycles and alarm 351 continuous and also #200 x dca=1
Printable View
Only 2003 X crc=1 and stb=1, all others are 0.
This morning I tried some g84 cycles and alarm 351 continuous and also #200 x dca=1
that means mainboard or option board fault :)
Do you know how to change the mainboard?
I think I don't have option2.
Attachment 419498
this is my mainboard.
Couldn't reply to your PM. Your storage is full.
Goodmorning
Michael
I checked the pulse coder cable, OK.
I added a cable to ground from the replaced MZ sensor (the machine originaly had a M sensor in the spindle motor).
This way the alarm hasn't appeared yet.
Let's see.....
hi michael .
how to solve your problem # alm 351 ?