In episode 12, I used the MAHO MH400E I converted to LinuxCNC, to make tapered gibs for the saddle.
https://youtu.be/P4BlYlfRtXM
Mark
Printable View
In episode 12, I used the MAHO MH400E I converted to LinuxCNC, to make tapered gibs for the saddle.
https://youtu.be/P4BlYlfRtXM
Mark
Now that the errors in the geometry of the main components has been addressed, I can move on to the CNC relevant stuff...
https://www.youtube.com/watch?v=fY3i7bYhIuQ
Mark
Episode 15 is now up. Covers the spindle motor, and includes some Maho Slotting head action.
https://youtu.be/yRhdeV1Fau4
Episode 16 deals with the Encoders, drivers and enclosure.
https://youtu.be/Kl0zS9zbH-s
Since I messed up Episode 17 last week...
https://www.youtube.com/watch?v=cLPPT1a20cw
... I didn't post a link to it then. Episode 18 is now up and back to the normal standard...
https://www.youtube.com/watch?v=1JFKs1kYJxM
Mark
Episode 19 is now up...
https://www.youtube.com/watch?v=QzSfhxELxp8
Happy fathers day from Austria,
Mark
Hi Guys, I just uploaded episode 20.
https://www.youtube.com/watch?v=L6KxpwCrEYY
Mark
Episode 21 is now in Youtube.
https://www.youtube.com/watch?v=0NMn3kzvA0o
Mark
Here is the link to Episode 22
https://www.youtube.com/watch?v=xTDwz-XExNo
Mark
Episode 23 is my challenge with the pc Giybyte PC...
https://www.youtube.com/watch?v=7xNS2MWN8Js
Mark
This week, I'm configuring the Mesa 7i96 Interfce card...
https://www.youtube.com/watch?v=YkQ8FZg4ZX0
Mark
In episode 25, I finished the controller, and got almost everything installed and tested.
https://youtu.be/i6wO_pgAIuI
Mark
Motion at last...
https://youtu.be/TNZWCuHoGrA
Mark
Episode 27 is up...
https://www.youtube.com/watch?v=ATdBXBOCII8
Mark
looking good Mark!
on a side note, I remember you had a cool wankle engine you were building a long time ago. What happened with that project?
Oh wow, I remember that being one of the motivations to get into CNCing, but by the time I had the machines I moved on to other interests, and have never gotten back to the Wankel engine. Maybe one day.
I just uploaded episode 29...
https://www.youtube.com/watch?v=G1Im42hJMbY
Mark
E30 is up. The first time I used tool offsets, including a crash due to my lack of understanding.
https://youtu.be/XbBYk9M4wnE
Enjoy,
Mark
great series!
Been fun watching them.
Thanks guys.
Mark