Chocolate bars made with CamBam.
Printable View
Chocolate bars made with CamBam.
Cutting the LBS Shad on the Syil X4 Speedmaster - YouTube
The LBS Shad was originally cut on the little MaxNC5 shown above in this thread. The X4 Speedmaster does it in less than half the time.
Designed in ViaCad all CAM done in CamBam:
https://www.youtube.com/watch?v=2hbrbHvlAuo
Ah, I see my LBS Shad Cutting Video Link got messed up. Here it is again.
Catching Fish With CamBam
https://www.youtube.com/watch?v=d2U3nQD17Yw&t
Its a pretty simple project, but sometimes you gotta do what you gotta do.
Replacing the plastic insert with one that won't break on a band saw table.
No this isn't for my new saw. Its for the old wood cutting saw. I figured I should throw a new insert in it before moving it out of the shop into the garage. I busted the old plastic one a long time ago.
https://www.youtube.com/watch?v=2HfI-3ORrcc
Machining a tiny little aluminum fuel line T.
Everything done in CamBam except the cutting.
https://www.youtube.com/watch?v=_qZTQEpUmYY
CamBam helped me make a new dial for the vintage (early 1970s) Soviet kitchen scale. My dear aunt is still using it after all those years.
https://i.ibb.co/ZBQqGF5/IMG-20190907-125452w.jpg
The original picture on the dial was long gone, so I found a photo of a better preserved specimen and turned it into line art the best I could. Here is what it used to look like when the scale was new:
https://i.ibb.co/j6xFLgS/102153701.jpg
image upload
I built in RC Excavator using real hydraulics system all using CamBam. :)
https://www.youtube.com/watch?v=j9p_L_YgYYE&t=299s