dakotalarry--
Either call me at Mag Maintenance Technologies or send me your e-mail or fax number & I will send you the wiring diagram for a T-814 single phase connection.
Neal
Printable View
dakotalarry--
Either call me at Mag Maintenance Technologies or send me your e-mail or fax number & I will send you the wiring diagram for a T-814 single phase connection.
Neal
Larry,
Call Neal... he is your Fadal man at the service department.
Steve
Neal came through! Your the man......man!
Does anyone have hookup info for a Sweo drive part# 010-033? I got one that will turn the motor forward but gets a 'current limit' when attempting reverse? Any info will be helpful. I'm trying to bench test it and don't know how to enable the start command.
Thanks in advance.
Hotrob1
The command signal is on pins 4 & 6 of the six pin molex conncetor.
Neal
Neal,
Thanks for the answer. The drive I have has a J1 (1 - 12) and J2 (1 - 8). Pins 5-6 (J1) is buffer input - and buffer input +. Not sure what they are. I have tried pulling the forward enable Pin 6 (J2) to pin 8 (J2) common. I know it runs forward but again I missing something.
I'm also using a 0 - 10V speed command input on Pin 10 (J1).
Thanks in advance.
Hotrob1