Anilam 1100 Controller Problem
I have an Ajax mill with a Anilam 1100 2 axis controller. When I boot the controller I get a message that says 'Dead Stop Switch Reached!' and I can't reset the servos. In fact I can't even start the spindle because it say something like 'servos are not reset'.
I am told that this problem started when the Y axis was accidentally driven all the way to the end stop.
I have checked the X and Y limit stitches, which are working ok.
Does any one have an idea what this problem could be caused by?
Many thanks,
Ben H
Re: Anilam 1100 Controller Problem
I have same problem, engineer linked all connectors on board with LED for limits 6 in row on left side, still get message I have to press clear 3 times, says servo delay please wait then drives come on OK
Re: Anilam 1100 Controller Problem
I have Anilam engineers e-mail in UK if you need it
Re: Anilam 1100 Controller Problem
Hi Chaps,
I have just got a second hand Ajax with a 1100M it was ok for a day then has a *halted message on the secondary screen and it will not clear. the servos are running and if I manual push the limit switches they throw up a message, so must be working. can anyone tell me what to look for, or am I being silly and missing something. the machine will will not jog in the manual mode or run the program until i can get rid of this message.
Any help much appreciated. John
Re: Anilam 1100 Controller Problem
Hi guys, I just bought a Bridgeport series 2 CNC with Anilam 1100m. I have it up and running but cant get the servos to energize. It hasent hit the limit switch as the beds are in the centre. When I push the E-stop and then release and then press reset servo nothing happens, can someone please help me out with problem, Thank you.