525,593 active members*
2,390 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Chinese Machines > PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization
Results 1 to 8 of 8
  1. #1

    Lightbulb PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization

    You can find below an as detailed as possible manual for use the VFDs PRT-E750 and PRT-E1500 with explanations of all the parameters, values to be set by default and explanations of the error codes.
    It takes me a a long time to complete it in french and in English...

    https://imaginierie.com/impression-3...brication-cnc/

  2. #2

    Re: PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization

    Quote Originally Posted by etiennebertrand View Post
    You can find below an as detailed as possible manual for use the VFDs PRT-E750 and PRT-E1500 with explanations of all the parameters, values to be set by default and explanations of the error codes.
    It takes me a a long time to complete it in french and in English...

    https://imaginierie.com/impression-3...brication-cnc/
    The URL changed. You can find a complete manual with parameters settings there:
    https://imaginierie.com/2-different-...manufacturing/

  3. #3

    Join Date
    Jan 2019
    Posts
    9

    Re: PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization

    Thanks for posting this. Information on this controller is harder to find than it should be. This is the most comprehensive manual I've found for the PRT VFDs.

    Appreciated!

    Cheers!

  4. #4

    Join Date
    Nov 2019
    Posts
    2

    Re: PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization

    Morning
    I have purchased a 6040 CNC from China with a PRT-E1500W driver 110 volt with USB.
    I like everyone else who seems to have bought one of these have no motor movement or spindle run.
    I have downloaded the great manual that etiennebertrand has created as there wasn't one that came with machine.
    I opened the box to check wiring and I have a black wire not connected to the usb interface board.
    The wire comes from the common from the spindle control board.
    Can someone confirm where it goes the only loose terminal on the board was output3.

  5. #5

    Join Date
    Nov 2019
    Posts
    2

    Re: PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization

    Need HELP
    I found the connection for the interface board and reconnected the wire.
    The dip switch settings showing in the pic are they the same for a 110 volt PRT-E1500 the same?
    Frustrated on getting the machine to run.

  6. #6

    Join Date
    Jan 2019
    Posts
    9

    Re: PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization

    Sorry, don't get on here very often. If you're still struggling with this please post pictures of your control box. It would be really helpful to also show a picture of the controller card inside. I'll help if I can but have to know what you've done so far and really need to know which variant of the 6040 you have. There are several and they're all set up a little differently.

    You may want to start a new thread with the above information since this one has been hanging around for a while and is marked "Solved". May get more bites that way, but it's really important for us to know which exact machine you have and pictures are a huge plus since, as you've found out, there really aren't any manuals for these things, model numbers don't always help. I managed to get mine running from the excellent threads posted here.

    Ken

  7. #7

    Join Date
    Dec 2019
    Posts
    1

    Re: PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization

    Without any question this is by far the most comprehensive and complete manual I've seen and yes it works great. I just received a CNCEST 6040 with 1.5KW Motor & USB and the information got me up and running very quickly. Thank you very much for such and extremely professional and well written document. Well done and greatly appreciated.

    Thank you again!

    Mike

  8. #8

    Re: PRT-E750 and PRT-E1500 Instructions for use ith detailed parameterization

    Quote Originally Posted by etiennebertrand View Post
    You can find below an as detailed as possible manual for use the VFDs PRT-E750 and PRT-E1500 with explanations of all the parameters, values to be set by default and explanations of the error codes.
    It takes me a a long time to complete it in french and in English...

    https://imaginierie.com/impression-3...brication-cnc/
    Hi Etiennebertrand (hope got your name correct), I used the manual you posted, to the 'T'. I have a CNC 6040 (Chinese) with a 1500W spindle. Every axis works fine. However the spindle will not spin. It will spin in manual mode, but will not when I switched to PC. Can you help me solve this please. Thank you, Bernard

Similar Threads

  1. Replies: 3
    Last Post: 04-20-2019, 11:24 PM
  2. Help with PRT-E1500 VFD 220v Please, spindle making a noise but not turning
    By graeme1234 in forum General CNC Machine Related Electronics
    Replies: 3
    Last Post: 01-13-2019, 07:42 PM
  3. Detailed information about scripts?
    By tantemay in forum PlanetCNC
    Replies: 1
    Last Post: 12-26-2018, 10:14 PM
  4. Chinese 3040 prt-e750 controller
    By JoshG502 in forum Chinese Machines
    Replies: 4
    Last Post: 11-30-2017, 12:03 AM
  5. VMC-200 Any one have detailed info on them
    By cnctoolman in forum EMCO CNC Machines
    Replies: 0
    Last Post: 10-19-2017, 11:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •