My company just brought our sister company into our building and they have old 1995 fadel machines. They are currently feeding the code to the machine from cimco(DNC). Does anyone know if it is possible to put an external hard drive that the machine will read the code from? Any help would be appreciated.
Results 1 to 2 of 2
-
08-04-2022, 10:40 PM #1
Moderator
- Join Date
- Mar 2003
- Posts
- 201
Question about old Fadel Machines
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-20-2022, 07:54 PM #2
Registered
- Join Date
- Mar 2008
- Posts
- 683
Re: Question about old Fadel Machines
I have one of these for each of my machines.
USBCNC-FAD-INT - Calmotion
There are a few other options out there but I have used this model for years with no problems.
Reply With QuoteSimilar Threads
-
Question about Patriot VFD Machines
By AFSarge in forum Shopmaster/ShoptaskReplies: 18Last Post: 01-21-2014, 04:21 AM -
Very Simple Question, It's just that i'm new to CNC machines
By Eyad.Arafat in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 10-12-2012, 09:48 AM -
Question on Romaxx Machines.
By jhurst54 in forum Benchtop MachinesReplies: 3Last Post: 05-06-2008, 04:15 PM -
Ejector question - electric machines
By dav612 in forum MoldmakingReplies: 4Last Post: 02-15-2008, 09:48 PM -
Post for Fadel format 1 with tool staging
By bookums69 in forum FeatureCAM CAD/CAMReplies: 4Last Post: 08-05-2006, 01:34 PM
Tags for this Thread
Posting Permissions
