545,781 active members*
1,814 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Apr 2008
    Posts
    10

    Quick Tech CNC lathes

    Anyone have any experience on Quick Tech CNC lathes, I have been offered a 2005 ATM 20S by a customer. I have spoken to a few people who run these machines and all have said that they would buy one again. Machine has 2 driven milling heads, 4 gang tools and 4 tail stock tools, Syntec controller and a bar feeder.

    I would appreciate any comments from anyone that has run these machines regarding reliability, accuracy, ease of use etc.

  2. #2
    Registered
    Join Date
    Mar 2009
    Posts
    4

    Re: Quick Tech CNC lathes

    Quote Originally Posted by ElectroTek View Post
    Anyone have any experience on Quick Tech CNC lathes, I have been offered a 2005 ATM 20S by a customer. I have spoken to a few people who run these machines and all have said that they would buy one again. Machine has 2 driven milling heads, 4 gang tools and 4 tail stock tools, Syntec controller and a bar feeder.

    I would appreciate any comments from anyone that has run these machines regarding reliability, accuracy, ease of use etc.
    I know this is late, but I run two QuickTech machines. They are great machines, but there are quirks depending on which control you're running. Let me know if you bought the machine and have questions.

    Jason

  3. #3
    Junior Member
    Join Date
    Apr 2018
    Posts
    2
    Do younhave the postprocessor for I-42 twin?

  4. #4
    Registered
    Join Date
    Dec 2008
    Posts
    12

    Re: Quick Tech CNC lathes

    Hello Jason,

    The Company I work for just received 2 Quick Tech IT-60 Robo machines and we aren't familiar with the Mitsubishi 700 Series control, or any Mitsubishi control as a matter of fact.
    I'm familiar with Okuma and Fanuc programming language. Is the Mitsubishi similar to either of these? Is there any way you would have any sample programs so I could compare
    the Mitsubishi language against the Okuma or Fanuc language. Is there even a website that could help out with this?

    Thank You,

    Bill

Similar Threads

  1. Quick Change Tooling CNC lathes
    By dak1 in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 09-26-2012, 02:13 PM
  2. Replies: 0
    Last Post: 02-17-2012, 08:19 AM
  3. Quick Change Tool Post for 7x10 Mini Lathes
    By widgitmaster in forum Mini Lathe
    Replies: 10
    Last Post: 07-14-2009, 10:01 PM
  4. Quick Start Tech Article
    By High Seas in forum DIY CNC Router Table Machines
    Replies: 6
    Last Post: 04-20-2004, 05:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •