500,330 active members
5,593 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    May 2013
    Posts
    2

    Thumbs up RAM won't start up?

    I have some problems with my Dainichi B35 lathe:
    I was making some parts and suddenly it stoppet in the middle of the cut and the monitor was frozen on the same screen.
    Tried to reset but nothing happened.
    When i try to restart the machine i get the following:

    FS10TF 1315K
    ROM: end
    RAM:

    Nothing happens after this and i get no alarm message on the screen.
    Only thing i can see is a red light on the RAM.

    I read that others had a problem with the "RAM parity error", could this be the same?
    I would really appriciate some help with this

    Attachment 371022

  2. #2
    Registered
    Join Date
    May 2013
    Posts
    2
    Bump

  3. #3
    Member
    Join Date
    Apr 2019
    Posts
    5

    Re: RAM won't start up?

    have you solved this issue ?

Similar Threads

  1. Replies: 4
    Last Post: 01-06-2009, 05:20 PM
  2. Single start vs double start ballscrew.
    By darik in forum Linear and Rotary Motion
    Replies: 13
    Last Post: 03-22-2007, 01:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •