549,886 active members*
1,811 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Jan 2016
    Posts
    2

    Ramped V-cut G code

    I need to make a cut useing a V-bit.
    Y axis is fixed and the X axis travels 400mm
    During this cut the Z axis starts at 0 and ends at -4mm
    Is there an example on how to do this in G code? Or is it more complex then that?

    Thank you,

    Robert

  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5242

    Re: Ramped V-cut G code

    G0 X0.0 Z0.0
    G1 X400.0 Z-4.0 F100
    G0 Z0.0
    Jim Dawson
    Sandy, Oregon, USA

  3. #3
    Registered
    Join Date
    Jan 2016
    Posts
    2

    Re: Ramped V-cut G code

    Thank you Jim,
    This worked just as I was hoping for!!!

    Robert

  4. #4
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5242

    Re: Ramped V-cut G code

    Glad it worked for you. Happy to help.
    Jim Dawson
    Sandy, Oregon, USA

Similar Threads

  1. G code to cut inside groove
    By choppero in forum BobCad-Cam
    Replies: 3
    Last Post: 04-05-2021, 10:13 PM
  2. Possible to have a Ramped entry on a Profile?
    By 777funk in forum BobCad-Cam
    Replies: 2
    Last Post: 04-12-2011, 08:29 PM
  3. How to construct a ramped spiral object
    By adamchapman in forum Mastercam
    Replies: 9
    Last Post: 10-19-2010, 07:07 AM
  4. ramped arcs are linear points no g2
    By dertsap in forum Mastercam
    Replies: 6
    Last Post: 01-19-2008, 06:28 AM
  5. Cut part render, and G code
    By moose in forum GibbsCAM
    Replies: 12
    Last Post: 11-24-2003, 03:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •