562,372 active members*
4,001 visitors online*
Register for free
Login
Page 1 of 2 12
Results 1 to 20 of 37
  1. #1
    Registered
    Join Date
    Aug 2008
    Posts
    3

    RZNC-501 host program

    I have bought DSP Controller (RZNC-501). I use flash disk to run my U-files. I found out that there is a USB slot at the bottom, I tried to plug it with a usb cable, and windows started to look for the software, but i don't have any software for it. Does anyone have the driver or host program of the RZNC-501? just in case there is one, i think it would be more convenient to use it rather inserting the usb flash disk.

  2. #2
    Registered
    Join Date
    Aug 2009
    Posts
    7
    Quote Originally Posted by arzie2000 View Post
    I have bought DSP Controller (RZNC-501). I use flash disk to run my U-files. I found out that there is a USB slot at the bottom, I tried to plug it with a usb cable, and windows started to look for the software, but i don't have any software for it. Does anyone have the driver or host program of the RZNC-501? just in case there is one, i think it would be more convenient to use it rather inserting the usb flash disk.
    If you like I can send the program for DSP 0501 and the driver

  3. #3
    Registered
    Join Date
    Aug 2009
    Posts
    7
    if you like I have the program and the driver

  4. #4
    Registered
    Join Date
    Aug 2009
    Posts
    7
    I have a CNC type OAKE 1224 and is no possible to run 22000 rmp now the machine run 10000 rpm , what kind of the machine you have? Can you send me the file to configuration it - nibbiosrl@alice.it

  5. #5
    Registered
    Join Date
    Aug 2009
    Posts
    7
    tell me the Email and I will sent you the software and drivers

  6. #6
    Registered
    Join Date
    Sep 2009
    Posts
    1

    Firmware for RZNC-D5416

    Hi! Does anyone has the latest firmware of the DSP or can post the link of the download? Thank you very much!

  7. #7
    Registered
    Join Date
    Mar 2008
    Posts
    11
    Quote Originally Posted by studiotuzi View Post
    if you like I have the program and the driver
    will the driver and program work with the RZthnc-052XSI-070927

    if so could you send it to ncmeinc@gmail.com

    Thanks

  8. #8
    Registered
    Join Date
    Mar 2008
    Posts
    11

    Rznc software

    Quote Originally Posted by studiotuzi View Post
    tell me the Email and I will sent you the software and drivers
    please send software and drivers for rznc to
    ncmeinc@gmail.com

    Thanks

    HARKO

  9. #9
    Registered
    Join Date
    Nov 2009
    Posts
    5
    Quote Originally Posted by studiotuzi View Post
    tell me the Email and I will sent you the software and drivers
    hello can u please help me,my dsp rzthnc-053xsi-l30 is not working at all,i think it need the host program i have driver up to date usbcam2.2 ,my dsp was chinese i updated the main program to English,the dsp stopped and dosn't display anything at all,i can't control any thing,thank u alot ...my Email: moodi_coor@hotmail.com

  10. #10
    Registered
    Join Date
    Nov 2009
    Posts
    5

    Lightbulb

    hello can u please help me,my dsp rzthnc-053xsi-l30 is not working at all,i think it need the host program i have driver up to date usbcam2.2 ,my dsp was chinese i updated the main program to English,the dsp stopped and dosn't display anything at all,i can't control any thing,thank u alot ...my Email: moodi_coor@hotmail.com

  11. #11
    Registered
    Join Date
    Jan 2010
    Posts
    0
    I need yur help !!
    I need the driver for rznc-05
    rodvek@gmail.com
    thank you...

  12. #12
    Registered
    Join Date
    Jan 2010
    Posts
    0

    dsp controller problem

    i have theRZTHNC-O53XSI DSP if someone have the software and drivers
    of this dsp pls help!!!!!my mail is tdrchris@yahoo.gr
    thanks!

  13. #13
    Registered
    Join Date
    Feb 2010
    Posts
    0

    dsp host program

    have tha RZNC 0501 DSP if someone have the software and drivers
    of this dsp pls help!!!!!my mail is iftadvertisment@yahoo.com
    thanks!

    Khaleel

  14. #14
    Registered
    Join Date
    Sep 2005
    Posts
    2
    Same problem, but i bought a used RZNC 0501 and the package contains two CDs. Both are defected. Please i need at least the software. I have found USBCam2.1 driver. So i need only the software even if demo, i will buy it later.
    abkar_6809@hotmail.com

  15. #15
    Registered
    Join Date
    Mar 2010
    Posts
    0
    Hi

    I can install the drivers and such but the program setup seems to do absolutely nothing.
    if someone could hook me up with the program that'd be greatly appreciated.

    cheers!

    ryan@rammpro.com

  16. #16
    Registered
    Join Date
    Jun 2010
    Posts
    0
    Quote Originally Posted by studiotuzi View Post
    if you like I have the program and the driver
    hi
    i would like these files if u can please
    A_M_I_R_O_@hotmail.com

  17. #17
    Registered
    Join Date
    Aug 2010
    Posts
    0
    hello masters!
    i have a sx-1325e machine and i have a problem with a new "rznc-0501". i connected the usb and installed the "usbcam.inf". the driver ok, but when I try to open "ZHBUSBConnect_E.exe" it shows me a message:

    "Can not identify USB communication protocol, please contact dealer and employ latest version!"

    then after pressing "OK" i get another message:

    "Failed to create empty document"

    and it doesnt open the program, what can i do?? Can you send me the program and drivers please? my email is andidemiraj@yahoo.com

    Best regards
    Andi Demiraj

  18. #18
    Registered
    Join Date
    Mar 2010
    Posts
    0

    ZHBUSBconnect program needed

    if anyone from this thread can e-mail me the "ZHBUSBconnect" program for this dsp, it would be very much appreciated.

    Thanks in advance

    Lenny,

    lee@fleetgrafix.co.uk

  19. #19
    Registered
    Join Date
    Nov 2010
    Posts
    0
    hi also i have that kind of problem my controller is not working also can u pls give me the software thank you very much
    heres my email ... melenciolacambra@yahoo.com.ph

  20. #20
    Registered
    Join Date
    Dec 2010
    Posts
    0

    RZTHNC-06 with DSP

    Dear All,

    I have bought laser cutting machine from china. Comes with RZTHNC-06 & DSP Controller.

    Was working fine for 1 year. Now Recently we got problem with DSP.
    Yesterday the machine was running ideal (Not cutting) suddenly laser beam comes out without operation of laser.
    I have switch off complete machine immidetly, after a while i have turn it ON.
    But now problem starts...
    DSP got blank, can not operate anything...

    My supplier doesn't answer me. Please help me!!!!!!
    Please mail me at shreejicutbend@yahoo.com or shreejicutbend@gmail.com

Page 1 of 2 12

Similar Threads

  1. Differences between DSP RZNC-D5416 and RZNC-0501
    By KDRusty in forum Chinese Machines
    Replies: 15
    Last Post: 06-04-2014, 10:06 PM
  2. Fanuc 18i MB Host Set-up
    By Helmuth in forum Fanuc
    Replies: 12
    Last Post: 07-05-2012, 02:29 PM
  3. Host Not Found
    By 68stang in forum Multicam Machines
    Replies: 3
    Last Post: 09-09-2011, 02:19 AM
  4. iZ-2 Control Host Program problem
    By McMaster in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 02-07-2011, 07:30 AM
  5. A host of EMC newbie questions - sorry!
    By gfixler in forum LinuxCNC (formerly EMC2)
    Replies: 19
    Last Post: 01-05-2007, 03:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •