535,471 active members*
3,620 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1

    Post Safop HT12 cnc lathe

    Hi,
    I have a newly installed lathe (fanuc 31i controller ) had a problem that, quill stroke is 300mm. but once we forward quill about 50mm in jog mode, turn to auto mode, machine alarm shows that, Quill is not in position for auto cycle. This machine is Italy made and this machine tool is no more. kindly any body knows the setting or thrust adjusting in some parameter please suggest.

  2. #2
    Registered
    Join Date
    Dec 2009
    Posts
    653

    Re: Safop HT12 cnc lathe

    there is a pressure sensor or proximity sensor that is not working,look for it

  3. #3
    Quote Originally Posted by zavateandu View Post
    there is a pressure sensor or proximity sensor that is not working,look for it
    .
    Everything is fine and working. The requirement is only thrust setting in machine parameter is not known. K
    Hope any other similar Safop lathe and its setting procedures will help me .

  4. #4
    Quote Originally Posted by zavateandu View Post
    there is a pressure sensor or proximity sensor that is not working,look for it
    In Control panel PMC status DB3804 setting for center 60 degree or 90 degree . Please suggest if any one already use this for sleeve or quill setting

Similar Threads

  1. Replies: 4
    Last Post: 05-03-2018, 04:14 PM
  2. Replies: 0
    Last Post: 05-05-2017, 06:45 PM
  3. CAD/CAM for 3-in-1 lathe/mill combo with lathe spindle stepper motor
    By KevMoto in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 04-30-2014, 08:59 PM
  4. Replies: 1
    Last Post: 05-29-2009, 07:47 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •